Q200 Series |
Q201 |
04/19/01 |
Government Source Inspection Requirements
(NASA contracts - Station Program) |
Q202 |
06/04/01 |
Government Source Inspection Contracts
(SSME Program) |
Q202J |
12/03/07 |
Government Source Inspection Contracts (J-2X Program) |
Q203 |
10/28/05
|
Pratt & Whitney Rocketdyne Source Inspection |
| Q203C |
07/26/11
07/06/11 |
Pratt & Whitney Rocketdyne Source Inspection |
Q204 |
08/15/03 |
Tin Plating |
Q204W |
09/25/09 |
Tin Plating (exception) |
Q205 |
07/06/11
04/27/01 |
Evidence of Inspections and Tests
Performed By Seller |
Q206 |
09/19/01 |
Government Source Inspection |
Q207 |
04/27/01 |
Physical and Chemical Test Reports
Identified to Specific Lots |
Q208 |
04/27/01 |
Evidence of Compliance with Reliability
Verification Provisions |
Q209 |
06/14/01 |
Material Safety Data Sheet |
Q210 |
12/09/02 |
Supplier Designed Drawing
Request (For Standard Catalog Hardware Only) |
| Q211 |
10/26/09 |
Counterfeit Parts Control |
Q212 |
12/10/02 |
Commercial Material Certification
Identification |
Q213 |
07/06/11
10/28/05
|
Oxygen Compatibility Testing |
Q214 |
04/27/01 |
Change Control of Baseline Documents
Contract Grouping Specification SSME (RL00144) or (RL10101) |
Q215 |
08/06/01 |
Records (SSME Program - Purchased
Labor Use Only) |
Q216 |
07/16/01 |
Weld Repairs of Castings |
Q217 |
10/28/05
|
Hazardous Materials Requirements |
Q218 |
10/28/05
|
Metallic - Materials Acceptance Testing - Canoga Park |
| Q218C |
07/06/11 |
Metallic - Materials Acceptance Testing - Canoga Park |
Q219 |
07/06/11
10/28/05
|
Material Review Record Inspection Discrepancy and Correction Record (IDCR) |
Q220 |
08/08/08 |
Nondestructive Test Documentation Requirements SSME Program |
Q220 |
04/19/02 |
Nondestructive Test Documentation
Requirements SSME Program |
Q221 |
04/27/01 |
Special Procurement Quality Assurance
Requirements |
Q222 |
06/14/01 |
Electrostatic Discharge Sensitive
Protection |
| Q223 |
10/28/05
|
QA- Nondestructive Test Source Inspection |
| Q224 |
11/27/01
|
Inspection Record Retention (Five Years) |
Q226 |
07/16/01 |
Space Station Product Assurance Requirements |
Q227 |
08/01/01 |
Inspection Record Retention (Ten
years) |
Q228 |
05/01/06
|
Inspection Requirements - SSME Program
Only |
Q229 |
05/01/06
|
Inspection Record Retention (SSME
Program) |
| Q230 |
02/05/07
08/11/05 |
Government Source Inspection Requirements- Department of Energy (DOE) |
Q232 |
09/20/01 |
Special Procurement Quality Assurance
Requirements For Non-SSME Program Hardware |
Q233 |
10/16/01 |
Nondestructive Inspection for Space
Station Hardware |
Q235 |
11/22/02 |
Characteristic Risk Analysis / Characteristic
Accountability Worksheet - SSME Program Only |
Q236 |
04/30/01 |
Space Station EEE Hardware - Evidence
of Lot Date |
Q237 |
06/14/01 |
Requirements for Printed Wiring Boards/Flex
Circuits (RS68 Program Only) |
Q238 |
06/14/01 |
Requirements for Process Producibility
Analysis (PPA) Testing of Multilayers
(RS68 Program Only) |
Q239C |
10/28/05
|
Non-Metallic Materials Acceptance
Testing |
| Q240 |
02/01/10 |
Material & Processing Specification Revision Flowdown |
| Q241 |
02/04/11 |
ATP Failure Requirement and Manufacturing Process Changes |
| Q242 |
02/04/11 |
Manufacturing Qualification Test (MQT), Manufacturing Process Verifications (MPV) |
Q243 |
10/28/05
|
Tool Accuracy Requirement |
Q271 |
03/10/08
|
AS9102 First Article Inspection Requirement with Aerospace Supplier Quality Requirement (ASQR-01) Revision 6 dated 12-15-2007 and Buyer Source Inspection |
Q271 |
05/01/06
|
AS9102 Aerospace First Article Inspection Requirement with Buyer Source Inspection, ASQR-08.2 and Deliverable Report |
| |
|
|
Q400 Series |
| Q401 |
08-08-11 |
ASME Boiler & Pressure Code Section 1 |
| Q408 |
08-08-11 |
ASME Boiler & Pressure Vessel Code Section VIII |
HS Series |
| HS-10 |
08-01-11 |
Hamilton Sundstrand Systems Requirements & Evaluation for Suppliers |
